Menu
A septic system is a self-contained underground wastewater treatment system. The septic system is composed of a septic tank and a leach/absorption area.
Our Calcium, Lime and Rust Remover is non-toxic and water soluble. The chemicals in the product are derived from vegetables, however we recommend all safety precautions be followed, per the back label of the bottle.
If Tarn-X is left on too long and is allowed to dry, it may discolor. Silver may turn golden, cloudy or dark gray in color if Tarn-X is left on too long and/or is allowed to dry on the silver. To remove the discoloration, fill a small bowl with 1/2 warm water, 1/2 Tarn-X and two drops of dish soap (Palmolive, Joy, etc.). With a soft clean cloth, wash the item with the mixture and rinse with cold clean water immediately. Dry the item off with a soft clean cloth. As a final step, apply a silver polish, to protect the item. This should restore your piece to its original condition. For large items, make sure you clean about 1/3 of the item at a time.
Rinsing with cold water IMMEDIATELY after use is one of the most important steps. If Tarn-X is not completely rinsed off, it may darken or discolor your silver. When cleaning multiple items, always thoroughly rinse and towel dry each piece before continuing to the next item.
If Range Hood & Stove is left on too long and begins to dry, it can be very difficult to remove.
Tarn-X will clean sterling silver, silver plate, platinum, copper, gold and even diamonds. Do not use Tarn-X on poorly plated silver, silver that has scratched or marred surfaces or any item that is not in good condition. Do not mix gold and silver items together when cleaning with Tarn-X.
No. It is only safe to use on white grout. If used on colored grout it will lighten the grout color over time or discolor.
No. The active ingredients in Brilliant Bath will have a reaction with the marble.
Unfortunately, we do not recommend using Calcium, Lime and Rust Remover on pool tile. It could remove the finish from the tile. In addition, if Calcium, Lime and Rust Remover comes in contact with chlorine, it could result in toxic fumes. We recommend consulting with a pool maintenance expert for their recommendation for products that are safe and effective.
We do not recommend using Calcium, Lime and Rust Remover on any natural stones, especially marble (even synthetic). The acids in our product will remove the seal, penetrating the marble and can compromise the natural beauty of marble. Even synthetic marbles are coated and real marble dust is used to give the effect of real marble. If you spill Calcium, Lime and Rust Remover accidentally on these surfaces, make sure to call a marble professional for further instructions.