Septic System is safe on pipes and porcelain and works on fats, oils, grease and other stubborn organic matter.

Wear household rubber gloves if you have a history of sensitive skin and always test a small area of the piece before beginning to clean. To polish your silver, shake the container of Silver Polish and then use a clean, damp cloth or sponge to apply the solution. Allow the Tarn-X Silver Polish to dry for at least a minute then buff to a high luster with a soft, dry cloth. Rinse the piece thoroughly with cold, clean water and then dry it with a soft cloth. Do not mix Tarn-X Silver Polish with other polishes.

Prior to using Tarn-X, use soap and hot water to remove any dirt or grime. Rinse with cold water and wipe dry before using Tarn-X. While wearing household rubber gloves, dip a cotton ball or soft cloth in Tarn-X and wipe on tarnished areas. For larger items, apply full strength Tarn-X to about 1/3 of article at a time, then rinse thoroughly. For heavily tarnished pieces, repeat the above process until all tarnish is dissolved. Tarn-X only removes tarnish. Always apply a silver polish after using Tarn-X Tarnish Remover for optimum shine, luster and help protect your silver from tarnishing quickly. After using Tarn-X, rinse immediately with cold water and hand dry with a soft cloth. Never leave Tarn-X on anything longer than two minutes and always test Tarn-X on a small area before cleaning the entire piece. Clean spills immediately. Some laminated surfaces (counter tops) are coated with a synthetic material which may be affected by Tarn-X. Keep Tarn-X away from stainless steel.

We suggest using Drain Opener monthly to keep your pipes free flowing and to prevent obstructions.

The purpose of the tank is to treat household waste. The tank treats the waste by the water falling to the bottom, the solids that are lighter float to the top and the heavier waste/sludge goes to the bottom. The sludge/solids that fall to the bottom must be treated with a septic system treatment to convert these materials into liquids which then will flow to the drain field.

In a well-ventilated area, mix equal amounts of Calcium, Lime and Rust Remover and warm water. Test on a hidden area before applying to the entire surface. Apply directly to the stain with a brush, cloth or sponge. After 2 minutes rinse promptly with cold water. Never leave Calcium, Lime and Rust Remover on an area for longer than two minutes. If the stain does not disappear, repeat this process and add more Calcium, Lime and Rust Remover solution as necessary. Never mix Calcium, Lime and Rust Remover with other household cleaners or bleach. Always read the manufacturer's directions of the item you will be cleaning to make sure that this product is compatible. Consumer discretion is always advised.

We recommend using or disposing of Calcium, Lime and Rust Remover within 3 years. Make sure cap is securely fastened after each use.

There are up to 15 applications in one 4.5 oz. can of Drain Opener. Do not hold down can for more than 1 second. If you push down longer then less will be available for use.

Range Hood & Stove should only be left on a surface 1-5 minutes then rinsed off with cool clean water. If the stain persists, repeat the process.

The Spotless Stainless Steel cleaner is a water based formulation. This means that you will NOT get any oily residue after using this product. When cleaning any of your stainless steel surfaces, spray the entire surface and wipe, using a clean, soft cloth, following the grain of the stainless steel.