To clean hard water stains, we recommend using a 50/50 solution (equal parts of Calcium, Lime and Rust Remover and warm water) into a glass or porcelain bowl. Apply solution to the affected stained areas of the glasses using a damp cloth or sponge. After 2 minutes, rinse thoroughly with cold, clean water. If it seems that Calcium, Lime and Rust Remover helped a bit but the glasses are not completely clear, repeat at full strength if necessary. Due to the natural density and hardness of calcium as a mineral, the calcium can actually etch and embed itself into the material of the glass (usually present by having a cloudy appearance vs. spotty).

We recommend pouring small amounts down a sink drain followed by cold water or flushing small amounts down a toilet at one time.

Always use Brilliant Bath in a well-ventilated area while wearing household rubber gloves and test a hidden area of the surface before beginning to clean. When cleaning, apply the solution to a clean damp cloth, sponge, brush or directly to the surface to be cleaned, allow the foam time to work and then rinse with clean, cold water. Never leave the solution on a surface for more than two or three minutes. If the stain persists, repeat the process. Do not use Brilliant Bath with other cleaners or bleach. Never reuse the bottle when it is empty.

Drain Opener can be used on a number of different drains. The directions for each type of drain follows. Remember never use Drain Opener in any drains where an acid or lye product is present and never mix Drain Opener with a chemical drain cleaner.

Blocked Sinks and Tubs 1. Fill sink with enough water to submerge cap. 2. Block overflow with damp rag or sponge and hold firmly.  3. Place cap over drain opening and press firmly for one second. Repeat if necessary.

Slow-Moving Drains 1. Place stopper in drain. 2. Fill sink or tub with 6-7” of water, remove stopper. 3. Block overflow with damp rag or sponge and hold firmly.  4. Place cap over drain opening and press firmly for one second. Repeat if necessary. Double Sinks 1. Place stopper in second sink and hold.  2. Follow the same directions as a blocked sink.

Shower Drains 1. Place can’s cap over drain ensuring it’s fully submerged in water. If the water level is not sufficient to cover the green cap, pour water into the cap. 2. Press firmly on handle for one second. Repeat if necessary.

For best results in front loading washing machine, product should be applied once per week, soon after using machine. Surfaces need to be allowed to dry after application. If mold is left on surface, like rubber gaskets or grout, for even a week, mold can embed into surface, in which case product will no longer work effectively.

When using Outdoor Furniture Cleaner always wear household rubber gloves and test on a hidden area of the surface before beginning to clean. When cleaning, apply the solution to a clean damp cloth, sponge, brush or directly to the surface to be cleaned, allow the cleaner time to work and then rinse with clean, cold water from your hose. For woven surfaces, cushions and fabric, use a soft-bristled brush while for smooth surfaces use a soft-bristled brush or a clean damp cloth. After cleaning, if the stain persists, repeat the process. Do not use Outdoor Furniture Cleaner with other cleaners or bleach. Never reuse the bottle when it is empty.

Mix one part (ex: 1 cup) Calcium, Lime and Rust Remover to eight parts (ex: 8 cups) water (for 10-12 cup automatic drip coffee makers). Run through coffee maker as if making coffee. Dispose of solution once product has run completely through the maker, then fill entire pot with clear, cold water and run a complete cycle twice. Instructions are for a regular 8-12 cup coffee maker. *Do not use Calcium, Lime and Rust Remover in coffee makers that hold water permanently. *Calcium, Lime and Rust Remover is not recommended for Gevalia, Keurig or Cuisinart coffee makers. *Do not use Calcium, Lime and Rust Remover in espresso machines. Always read your coffee maker’s manufacturer’s directions before using Calcium, Lime and Rust to make sure product is compatible. Certain coffee makers contain permanent carbon/charcoal filters. Consumer discretion is always advised.

To clean a dishwasher, remove dishwashing rinse agent before using Calcium, Lime and Rust Remover. Pour a 1/2 cup of Calcium, Lime and Rust Remover directly into the bottom of an empty dishwasher (no glasses, dishes, or flatware but the racks can stay). Run a normal cycle followed by an extra rinse cycle. Make sure there are no detergents or any other chemicals in the machine while using our product. Washing Machine: Run your empty machine (no clothes) without detergent up to the main wash cycle, which is where the water stops and the cycle is about to agitate. Stop the machine and add one-half cup of Calcium, Lime and Rust Remover directly into the tub of the machine. Finish cycle. Run one additional full cycle (wash and rinse) with water only to rinse machine fully. If your machine is HE (high efficiency) and/or 'Water Saver' we recommend using a 1/4 cup of Calcium, Lime and Rust Remover, instead of the normal 1/2 cup recommended for any other type of washer/dishwasher. For Front Loading Machines: Simply add a 1/2 cup of Calcium, Lime and Rust Remover to the soap dispenser (only 1/4 of a cup for HE machines). After the full cycle has completed, run an additional rinse cycle with just water. Make sure there are no clothes or other chemicals in the machine when using our product.

When cleaning a showerhead, we recommend using a 50/50 solution (equal parts) of Calcium, Lime and Rust Remover and warm water. If possible, remove the showerhead and submerge it in the solution for no longer than 2 minutes (using an old toothbrush on the face of the showerhead after it has soaked will assist in removing the mineral buildup) then rinse promptly and thoroughly with cold water. Repeat at full strength if necessary, rinsing thoroughly after each application.

To use Range Hood & Stove, sweep the area clean of heavy dirt and dust. For stains such as tar or heavy grease, scrape off as much as possible with a putty knife before cleaning. While wearing household rubber gloves, test a small, hidden area of the surface first before cleaning the main area. Pour or brush full strength to an area no larger than 12" x 12". Depending on size and difficulty of the stain, let the solution soak for one to five minutes. Clean the area with a clean brush or broom until the stain is loosened. Rinse at once with cool, clean water. Repeat the process if necessary. Do not use Range Hood & Stove with any other cleaners, bleaches or acids. If cleaning near grass or shrubs, rinse the grass and shrubs before and after cleaning.